FurnitureDoes the factory have appropriate equipment to support "critical" infactorysafety testing?

　　Factory must possess and use test equipment to ensure product is safe during normal foreseen use.

　　Testing capabilities must include:

　　a) Tipping / Stabilityb) Static Loadc) Dynamic Loadd) Moisture Meter - only applicable for Solid Wood materialse) other test requirements as neededNote: In rare circumstances MT may determine certain test is not relevant for product.

　　工廠必須要擁有并且有使用以下測試設備來確保產品在正�？深A見的使用中的安全性。測試須包括：

　　A) 傾倒/穩定性測試B) 靜壓測試C) 沖擊測試D) 濕度測試 - 只適用于實木材質E) 其它所適用的相關測試備注：根控府徽參白準側從和：MT和楚側徽準容看特準白浴談側風看檢普和s那粘疵u、 FurnitureAre there records indicating that test equipment is used by factoryQC at defined milestones or production frequencies?

　　Review a sampling of the factories in line test records to verify the following:

　　1) Records must show that First of Production Units are tested as appropriate.

　　2) Records must show that additional testing takes place by factory QC per defined milestonesand/or frequency.

　　隨機抽查工廠正在做的測試記錄，核實以下內容：

　　1)記錄必須顯示，首件產品通過了相應的測試。

　　2)記錄必須顯示，工廠的QC人員有按照工廠規定的生產階段/或頻率來執行針對產品的安全性或可靠性的測試。

　　Toys and Children's Hardgoods productDoes the factory have appropriate equipment to support in-factorysafety testing?

　　工廠內部是否有合適的測試設備做產品的安全測試?

　　Verify the factory has and is using the following test equipment as applicable to the product designand age grading.

　　1) Cylinder for small parts2) Sharp edge tester3) Sharp point testerNot Applicable will apply if based on design and age grade, all of this test equipment is notapplicable to the product.

　　核查工廠是否有并正在使用下列測試設備，做符合產品設計和適用相關兒童年齡段的測試。

　　1) 小部件測試儀(模擬兒童喉管)2) 鋒?尖點測試儀器3) 鋒?邊緣測試儀器根據產品設計和適用年齡段，可能有些產品不需做這些測試。

　　Toys and Children's Hardgoods productPlush/Sewn product - does factory have metal detection AND needlepolicy?

　　工廠生產毛絨填充玩具或者車縫產品時，是否有金屬探測儀和斷針/鋒利工具的管控程序?

　　Verify the factory has and uses metal detection & broken needle control.

　　1) All product must pass through metal detector2) Records must support all product passes through metal detector3) A documented needle management system must exist4) Needle log must be accurate and up to dateNot Applicable will apply if the factory can provide acceptable justification as to why metaldetection and needle control is not applicable to the product manufactured.

　　核查工廠有并使用金屬探測儀和斷針控制程序。

　　1) 所有產品必須通過金屬探測儀測試。

　　2) 是否有記錄，證明所有產品通過了金屬探測儀測試。

　　3) 必須要有斷針更換程序文件。

　　4) 斷針記錄必須準確并是最新的。

　　如果工廠能提供可接受的正當理由，說明所生產毛絨填充玩具或者車縫產品無需金屬驗測和做斷針控制，則選記錄"不適用Not Applicable"。

　　Toys and Children's Hardgoods productBased on product age grading, does factory have appropriate "useand abuse" testing capabilities?

　　工廠生產有兒童年齡限制的產品時，是否可以進行"正常使用和濫用"的測試?

　　Verify the following:

　　1) Appropriate "drop test area" per ASTM F963 requirement2) Calibrated pull test gauge with appropriate "tooling" for product3) Calibrated torque test equipment appropriate for products currently being produced at the factory4) Based on the product design; additional safety testing equipment may be necessaryNot Applicable can be recorded If the factory is sending product out for Use & Abuse testing to a3rd party testing lab per a defined frequency based on a risk assessment.

　　Not Applicable will apply if the products manufactured do not have age grading.

　　核查工廠以下的測試能力：

　　1)與ASTM F963要求相符的"產品跌落測試"的設備。

　　2)通過校驗的標準拉力測試儀, 且配備適合產品的夾具。

　　3)通過校驗的標準扭力測試儀，適用于正在生產的產品測試。

　　4)根據產品設計，其他可能需要的安全測試設備。

　　如果工廠按照一個經過風險評估的既定頻率，送產品到第三方實驗室進行正常使用和濫用的測試，則記錄為"不適用Not Applicable"。

　　如果該測試并不適用于生產的產品的適用年齡段，選用"不適用 NotApplicable" Toys and Children's Hardgoods productAre there records indicating that all appropriate test equipment areused by factory QC at defined milestones or production frequencies?

　　工廠有否記錄顯示，所有的測試設備是由QC按照規定生產階段或頻率來使用?

　　1) Records must show that First of Production Units are tested as appropriate2) Records must show that additional "ongoing" testing takes place by factory QC per a defined anddocumented frequency (minimal requirement is once per lot)1) 記錄必須顯示首件產品必須經過相應的測試。

　　2) 記錄必須顯示進行的持續性測試項目是由工廠QC 按文件規定的 頻率完成(每個生產批次最少做一次測試。

　　Toys and Children's Hardgoods productAre there records indicating that product is tested at a CPSCaccredited third party lab?

　　工廠是否有記錄顯示，產品是經過CPSC認證的第三方實驗室進行的測試?

　　Verify satisfactory test reports from a CPSC accredited 3rd party lab are available.

　　核查一系列合格的產品測試報告，以確定這些測試報告是由一個CPSC認定第三方實驗室出具的。

　　ElectricalDoes the factory have appropriate equipment to support "critical" infactorysafety testing?

　　工廠是否有適當?shù)臏y試設備去執行有關產品安全性能的重要測試?

　　If AC (Alternating Current) product and HI POT testing is appropriate; the factory must have one ofthe following:

　　1) HI POT equipment and records indicating Factory QC uses it at a defined frequency (100% ACproduct must be HI POT tested)2) Records indicating that "supplier" QC of the electrical sub-assembly used HI POT test equipmentat "supplying" factory (records must indicate 100% of the AC sub-assembly product was HI POTtested)Not Applicable will apply if all products manufactured are not AC powered.

　　如果是交流電驅動的產品并且適用高壓測試，工廠必須有以下測試中的一項： 1)高壓測試設備以及工廠QC依照計劃的頻率使用該設備的相關記錄。(交流電驅動的產品必須100%進行高壓測試)2)有適當?shù)挠涗涳@示，電器配件供應商的QC有在其工廠內進行高壓測試。(記錄必須顯示外發裝配的交流電器產品進行100%進行過高壓測試)此項目不適用于非交流電驅動的電器產品.

　　Electrical Does the factory have a Multi-Meter? 工廠是否有萬用表?

　　Required for both AC & DC product. Observations and records must indicate Multi-meter is beingused for basic test or verification activities.

　　適用于交直流電器產品。觀察數據與記錄必須表明萬用表正用于基本測試或相關核實用途中。